Table of Contents
Advertisement
2 Operation
2.4 Viewing images from mobile/tablet terminals
⑪[Manual focus adjustment]
Adjust the focus manually.
[Near]: Adjust the focus to the [Near].
[Reset] returns focus (focus) to its default settings.
[Far]: Adjust the focus to the [Far].
⑫[Auto focus]
When [Execute] is clicked, the auto focus function is activated to automatically adjust the focus
to the subject in the center of the picture.
[Note:]
・The zoom (magnification) switches between the optical zoom and EX optical
zoom.
[Important]
・With the mask area, privacy zone, operation detection area, undesired detection
area, and VIQS area set, setting the EX optical zoom will shift the position.
Therefore, set the EX optical zoom and then set each area.
→9.4.2 Set the mask area
→9.4.5 Setting the privacy zone (Privacy zone setting screen)
→12.6 [VMD area] to set the motion detection area
→12.8 [SCD area] to set up undesired detection areas
→9.4.7 Set up the VIQS area
[Note:]
・One-click on the [Near] or [Far] buttons may appear to have no change in focus
due to trace adjustments. If you want to move the focus position large, press and
hold the button for a long time.
[Important]
・If auto focus is executed while the slow shutter is running (e.g. at night) with the
[Maximum shutter] set to a longer time than [1/30s maximum] (2/30s maximum],
[4/30s maximum], [6/30s maximum], [10/30s maximum], or [16/30s maximum]),
it may take a lot of time to complete auto focus.
・The focus may not be adjusted automatically in the following locations or subject.
In this case, adjust the focus manually.
-Be a big move
113
Advertisement
Table of Contents
