Table of Contents
Advertisement
16 [Maintenance] to maintain the machine
16.4 [Default reset] to initialize and restart the computer
16.4
[Default reset] to initialize and restart the computer
Click [Default reset] in the Maintenance page. Refer to the following how to display and operate
the Advanced menu.
→5.1 How to display
→5.2 How to operate
Here, initialize the computer's setup data and restart the computer.
[Reset to the default(Except the network settings)]
When [Execute] is clicked, the computer settings are reset to default settings. However, the
network-related settings are not initialized.
When the initialization operation is performed, the product cannot be operated for approximately
3 minutes.
[Load the default HTML files (setup menu).]
[Execute] returns HTML files to their defaults.
When the initialization operation is performed, the product cannot be operated for approximately
3 minutes.
[Reset to the default and load the default HTML files.]
Press [Execute] to reset the computer settings and HTML files to their default settings. However,
the network-related settings are not initialized.
<SD>An error occurs in the SD
Memory Card. Check the SD Memory
Card status.
[Important]
・To use this function correctly, format the SD Memory Card on your computer
before using the SD Memory Card.
・The correct information may not be displayed on the SD Memory Card used on a
computer other than this unit.
・Up to 30 SD Memory Card logs can be saved in the internal memory of this
computer. If the maximum number of system logs that can be saved is exceeded,
the log is overwritten from the old log.
Data is continuously missing during write
processing on the SD Memory Card. Confirm
that the SD Memory Card is correctly
recognized. If not, restart the computer or
unplug the SD Memory Card and insert it again.
457
Advertisement
Table of Contents
