Table of Contents
Advertisement
14 Networking configuration [Network]
14.1 Networking [Network]
the IP address set on the PC or other network camera.
[Subnet mask]
When the DHCP function is not used, enter the subnet mask of the computer.
[Default gateway]
If you do not use the DHCP function, enter the default gateway for your computer.
[DNS]
Specify whether the DNS server addresses are automatically acquired ([Auto]) or manually
entered ([Manual]).
When set to [Manual], you need to configure the DNS server IP addresses.
If you use the DHCP function, you can automatically obtain the DNS server address by setting it
to [Auto].
Contact your system administrator for the setting.
[Primary server address], [Secondary server address]
If you use [DNS] with [Manual], enter the IP address of the DNS server.
Contact your system administrator for the IP address of the DNS server.
IPv6 network
[Manual]
Configure [On] and [Off] to manually configure IPv6 addresses.
[On]:Manually enter the IPv6 address.
[Off]:IPv6 address cannot be entered manually.
[IP address(IPv6)]
[Note:]
・Multiple IP addresses are not available even when the DHCP function is used.
Contact your network administrator for the DHCP server configuration.
[Note:]
・Multiple IP addresses are not available for the default gateway, even if you use the
DHCP facility. Contact your network administrator for the DHCP server
configuration.
[Important]
・When IPv6 is accessed, the stream image cannot be displayed on the live screen.
If you want to display the stream image on the live screen, please access it via
IPv4.
393
Advertisement
Table of Contents
