i-PRO WV-X86531-Z2-PTZ User Manual page 280

9 [Image/Audio] for setting images and sound files
9.4 [Image quality] to set the image quality
To Advanced Settings in [Extra zoom] on the [Image quality] tabs of video pages>>Click the
[Button]. ([Image quality] for setting image quality adjustment, zoom/focus, privacy zone, VIQS,
and lens distortion compensation)
→9.4 [Image quality] to set the image quality
Use EX Zoom to adjust the angle of view of the image.
・Adjust the zoom factor in the [Wide angle] direction.
・Zoom (magnification) 1.0 times.
・Adjust the zoom factor in the [Telescope] direction.
[Note:]
・[MULTI] The camera to adjust the angle of view can be selected.
[Note:]
・The maximum magnification of the EX zoom depends on the model and the [Image
capture mode] you are configuring.
・Refer to the catalog specifications for the maximum magnification of each model.
[Important]
・The extra zoom function may not be activated on the appropriate position if the
setting for the function is performed after the settings for the VIQS area, privacy
zone, VMD area, and SCD area. Therefore, configure each area's settings after
configuring the extra zoom settings.
→9.4.6 Set up VIQS
→9.4.5 Setting the privacy zone (Privacy zone setting screen)
→12.5 [VMD area] for setting motion detection
→12.7 [SCD area] to set up undesired detection
・Set the mask area to 1.0 times the zoom factor. After the EX zoom is set, the
mask position is specified when the zoom (magnification) is 1.0 times.
→9.4.2 Set the mask area
273