i-PRO WV-X86531-Z2-PTZ User Manual page 389

Table of Contents

Advertisement

13   [User mng.] to set authentication
13.4   [IEEE 802.1X] to configure IEEE 802.1X
[Expired]:Certificate expired
The [Execute] buttons enable you to view more information about client certificates.
You can delete client certificates by using the [Delete] buttons.
[EAP method]
Select the authentication method from [EAP-PEAP], and [EAP-TLS].
EAP‑PEAP
1
Select [On] in [IEEE 802.1X].
2
Select [EAP-PEAP] in [EAP method].
3
Enter [User name] and [Password]/[Retype password] and press [Set].
EAP‑TLS
1
In the [CA Certificate] [Certificate install], click the Select Files button, select the CA
certificate, and then click the [Execute] button.
[Information] displays the host name (Common Name) you specified when creating certificates.
2
Click the File button on the Client Certificate that contains the private key or private key
and select the client certificate that contains the private key or private key.
3
Enter [Password] if the private key is encrypted or if the password is set to a PFX-based
client certificate. If it is not encrypted, leave it blank.
4
You install by clicking [Execute].
[Installed] is displayed on the [Install status of private key].
For Client Certificates containing private keys, the [Client Certificate] [Information] also
displays [Installed].
5
If you installed a private key in step 2, click the Select Files button on the [Client
Certificate], select the client certificate, and then click the [Execute] button.
[Information] displays the host name (Common Name) you specified when creating certificates.
6
Select [On] in [IEEE 802.1X] and select [EAP-TLS] in [EAP method].
7
Enter the user name registered with the server in [User name] and press [Set].
[Note:]
・Make sure the client certificate has not expired. If you use an expired certificate,
you may not be able to connect to the authentication LAN switch.
[Note:]
・If you upgrade while [EAP-MD5] is set in [EAP method], the [EAP method]
operates using [EAP-MD5]. Click the [Set] button to change [EAP method] to
the selected EAP method.
382

Advertisement

Table of Contents
loading

Table of Contents