i-PRO WV-X86531-Z2-PTZ User Manual page 219

8 [Basic] for basic setup of the machine
8.2 [SD memory card] for setting SD Memory Cards
Check the SD Memory Card.
Recording stream
[Recording format]
Select the type of image data to be saved on the SD Memory Card.
[Off]:Image data is not saved.
[JPEG(1)]:Still image (JPEG(1)) is saved. Save your data according to the [JPEG(1)] Image capture
size on the [Image] tabs of the video and audio pages.
[JPEG(2)]:Still image (JPEG(2)) is saved. Save your data according to the [JPEG(2)] Image capture
size on the [Image] tabs of the video and audio pages.
[Stream(1)]:Save the movie (stream (1)) in MP4 format. Save your data according to the
[Stream(1)] settings on the [Image] tabs of the video and audio pages.
[Stream(2)]:Save the movie (stream (2)) in MP4 format. Save your data according to the
[Stream(2)] settings on the [Image] tabs of the video and audio pages.
[Stream(3)]:Save the movie (stream (3)) in MP4 format. Save your data according to the
[Stream(3)] settings on the [Image] tabs of the video and audio pages.
[Stream(4)]:Save the movie (stream (4)) in MP4 format. Save your data according to the
[Note:]
・The password lock function supports SDHC memory card or SDXC memory card
only.
・When using an SD Memory Card with Password lock set on a device other than
this device, release the password by pressing the Password lock release button,
and then remove the SD Memory Card from the card. You cannot cancel the
password on any device other than the camera, such as a PC.
・If the [SD memory card password lock] [Status] is [Lock] and the SD Memory
Card with no password setting is inserted into the computer, the password is
automatically set to the SD Memory Card.
[Important]
・If you forget the set password, you cannot cancel the password. Since the SD
Memory Card with the password set cannot be used, be sure to manage it carefully.
・If you forget the set password and want to replace it with a new SD Memory Card,
set the [SD memory card password lock] [Status] to [Not been set] in advance by
following one of the steps below.
Enter the password using the release button and press the set button.
-Initialize the set value from the maintenance page.
212