Table of Contents
Advertisement
3 Setting
3.3 [Stream] for setting images
For a detailed explanation of the settings and notes for setting, refer to the [Image] tabs on the
image/audio pages in the detailed settings.
→9.1 [Image] to set the imaging modes
[Common]
Set the common items for JPEG and stream.
・ [Image capture mode]
Select the image to be displayed on the live image, etc.
・ [Initial display stream]
Select the image to be displayed on the live image page.
[Stream]
Select the number of the stream and set the [Stream transmission].
・ [Stream transmission]
On/Off sets whether to deliver H.265 (or H.264) images.
・ [Stream encoding format]
Select the compression method for the stream to be delivered.
・ [Image capture size]
Select the resolution of the H.265 (or H.264) image.
・ [Image quality]
Select the quality of the H.265 (or H.264) image.
・ [Transmission priority]
Set the stream delivery mode.
・ [Frame rate*]
Sets the frame rate.
・ [Max bit rate (per client) *]
Select the H.265 (or H.264) bit rate for one client.
・ [Auto VIQS]
Images are distributed so that the quality of images in moving places is high and the amount of
data in other places is low.
・ [Smart VIQS]
Images are distributed so that the amount of data decreases while maintaining high image
[Note:]
・Refer to the catalog specifications for the functions installed in each model.
136
Advertisement
Table of Contents
