i-PRO WV-X86531-Z2-PTZ User Manual page 406

14 Networking configuration [Network]
14.2 [Advanced] for advanced networking settings
[Address 1] through [Address 4]
Set the mail address of the notification destination. You can set up to 4 notification destinations.
Number of characters that can be entered:3 to 128 characters
Input Characters:Half-pitch alphanumeric and half-pitch symbols @ . _ ‑
To delete a set e-mail address, press [Delete] for the e-mail address to delete.
[Terminal 1]:Mail is notified when an alarm is generated at terminal 1.
[Terminal 2]:Mail is notified when an alarm is generated at terminal 2.
[Terminal 3]:Mail is notified when an alarm is generated at terminal 3.
[VMD]:Mail is notified when operation is detected.
[SCD]:Notifies by e-mail when undesired detection occurs.
[Command Alarm]:Mail notification is executed when a command alarm is entered.
[Audio detection]:Mail is notified when sound is detected.
[Diag.]:
-SD Memory Card Remaining capacity notification
-SD Memory Card with insufficient free space
-SD Memory Card recognition error
[Auto track]:Mail is notified when an automatic tracking alarm is generated.
[E-mail subject(Alarm)]
Enter the subject of the alarm mail.
Number of characters that can be entered:0 to 50 characters
Use the camera title:The camera title is displayed in the mail subject line.
Cause of alarm:Add an alarm factor to the email subject.
[E-mail subject(Diag.)]
Enter the subject of the diagnosis mail.
Number of characters that can be entered:0 to 50 characters
[Note:]
・Some SMTP servers may not support SSL.
・The SMTP over SSL method is supported. STARTTLS is not supported.
・If set to [On], you might need to set the SMTP port number to 465. Check with
your provider for details.
[Note:]
・Message recipient The diagnostic mail notified when the [Diag.] field is checked
does not reflect the [E-mail subject] and [E-mail body] settings set below.
399