Table of Contents
Advertisement
15 [Schedule] for scheduling
1～256:When the scheduled time is reached, the preset position is moved from the preset
position registered beforehand to the selected position.
[Auto track permission]:Allows the auto-tracking setting set on the [Auto track setting] tab
while scheduling.
[Auto pan]:When the scheduled time is reached, the auto pan operation set in the [Position]
tab starts.
[Patrol 1]:When the scheduled time is reached, Patrol 1, which is set in the [Position] tab,
starts. It is valid only when [Patrol 1] is set.
[Patrol 2]:When the scheduled time is reached, Patrol 2 set in the [Position] tab starts. It is
valid only when [Patrol 2] is set.
[Patrol 3]:When the scheduled time is reached, Patrol 3, which is set in the [Position] tab,
starts. It is valid only when [Patrol 3] is set.
[Patrol 4]:When the scheduled time is reached, Patrol 4, which is set in the [Position] tab,
starts. It is valid only when [Patrol 4] is set.
[Preset sequence 1]:When the scheduled time is reached, preset Sequence 1 set in the
[Position] tab starts. It is valid only when [Preset sequence 1] is set.
[Preset sequence 2]:When the scheduled time is reached, preset Sequence 2 set in the
[Position] tab starts. It is valid only when [Preset sequence 2] is set.
[Preset sequence 3]:When the scheduled time is reached, the preset sequence 3 set in the
[Position] tab starts operation. It is valid only when [Preset sequence 3] is set.
[<Automatic schedule> Daytime: Image Quality 1 / Night: Image Quality 2]: At sunrise, the
image quality is set to [Scene file 1], and at sunset, the image quality is set to [Scene file 2].
Only schedule 1 can be selected. This cannot be selected if the sunrise/sunset times have
not been set. Please refer to the following for the setting method.
→15.3 How to change the image quality based on the time of sunrise/sunset
2
Checks the Day of the week boxes in which you want to schedule in [Schedule].
[Note:]
・When using [Access permission], set [User auth.] to [On] on the [User auth.] tab
and [Host auth.] to [Off] on the [Host auth.] tab.
→13.1 [User auth.] to configure user-authentication
→13.2 [Host auth.] to configure host-authentication
・If you want to use [SD memory recording], set [Recording format] in the [SD
memory card] tabs to streams and set [Save trigger] to [Schedule].
・Schedule 1 [<Automatic schedule> Daytime: Image Quality 1/ Night: Image
Quality 2] and Schedules 2 to 8 [Image Quality 1: Scene 1 (Scene file 1)], [Image
:
)],
439
:
)],
Advertisement
Table of Contents
