i-PRO WV-X86531-Z2-PTZ User Manual page 114

2 Operation
2.4 Viewing images from mobile/tablet terminals
Preset No.
Set the position number to be registered.
Preset ID
Use [On] and [Off] to set whether the position name is displayed. You can set for each preset
position.
[On]:Displays the position name.
[Off]:The position name is not displayed.
Preset ID (0-9,A-Z)
Enter the name to be displayed on the image. You can set for each preset position.
Number of characters that can be entered:0 to 40 characters
Input Characters:0-9 (single-byte), A-Z (single-byte, uppercase, lowercase), double-byte,
single-byte symbol ! " # $ % & ' ( ) * + , ‑ . / : ; = ?
orientation or zoom in on the screen.
-If you cannot adjust the orientation of the camera with the tablet operation, refer
to the following to move the camera orientation in the direction you want to
register.
→2.4.1 Viewing images from mobile devices (smartphones, etc.)
[Important]
・If you set [Preset ID], be sure to press [Register].
[Note:]
・When set to [On], the position name is displayed where you set the position in
[Camera title position] on the [Basic] tab.
[Important]
・If you set [Preset ID (0 – 9,A – Z)], be sure to press [Register].
[Note:]
・The position name entered is displayed next to the preset position number in the
pull-down. If [Preset ID] is set to [On], it can also be displayed on the images.
107