i-PRO WV-X86531-Z2-PTZ User Manual page 441

14 Networking configuration [Network]
14.4 How to configure DDNS
Confirm the [Viewnetcam.com] services be registered
1 Click [Status] in the Maintenance page.
2 Ensure that [Service contract is already registered.] is displayed in the [Status] of the
[Viewnetcam.com] in the [Status] tabs on the Maintenance page.
Configure port forwarding without using UPnP
However, depending on the router, this URL cannot be accessed from a PC
connected to the same network (LAN) as the camera.
・If [Link to MIEMASUNET registration] is not displayed, make sure that you have
registered to [Viewnetcam.com] and that your PC is connected to the Internet,
and then press the Update browser button.
・If [User registered] is displayed in the [Viewnetcam.com] [Status] on the [Status]
tab of the Maintenance page, restart the camera after registering the
[Viewnetcam.com] service.
After restarting, make sure that the URLs registered in the [Viewnetcam.com]
[Personal(Camera) URL] are displayed in the [Status] tab on the Maintenance
page.
・The [Viewnetcam.com] service provides services other than dynamic DNS
services. For more information, refer to the [Viewnetcam.com] services website
(http://www.viewnetcam.com/).
[Note:]
・If you see anything other than [Service contract is already registered.] in the
[Viewnetcam.com] [Status] on the [Status] tab of the Maintenance page, restart
the camera and re-access the screen.
434