i-PRO WV-X86531-Z2-PTZ User Manual page 329

10 Set PTZ
10.2 [Position] for setting positions
Pan/tilt range setting
On/Off sets whether to enable the range that restricts the pan tilt operation.
Set [On] and use the control pads/buttons to adjust the field angle to set [Left end], [Right end],
[Top end] and [Bottom end].
[Left end]/[Right end]/[Top end]/[Bottom end]
Adjust the angle of view with the control pad/button and press the [Set] button to view the angle
at the set position.
[Note:]
・The [Left end] angle should be smaller than the [Right end] angle and the
[Bottom end] angle should be larger than the [Top end] angle.
・Set [Pan/tilt range setting] on a screen that is not zoomed in.
If you set the display size to 1.0 times (x1) on the zoomed display, a larger area
than when the display was set (enlarged display) is displayed.
322