Table of Contents
Advertisement
8 [Basic] for basic setup of the machine
8.2 [SD memory card] for setting SD Memory Cards
Installing and removing the SD Memory Card
[Insert/Remove SD memory card mode]
To install or remove an SD Memory Card, press [Execute].
After the SD Memory Card has been installed and removed, click the [Release] button.
-Save/retrieve image when alarm is generated
-Save/retrieve images when manually saved
-Save/retrieve images using the Schedule function
-Save/retrieve alarm log, manual/schedule save log, system log
-Saving/retrieving images using SD Memory recording function of our network
disk recorder
-Play/download images on the SD Memory Card
・When formatting is performed, the operation is interrupted if another user is
working on it.
・You cannot write to the SD Memory Card during formatting.
・When formatting is performed, all data stored on the SD Memory Card are deleted.
・Do not turn off the computer during formatting.
・After formatting, the SD Memory Card displays less than the total amount of
space because it creates the initial directory required to operate.
・The use of an SD Memory Card for i-PRO devices is recommended.
・When recording images repeatedly on an SD Memory Card using the automatic
overwrite function, use an SD Memory Card with high reliability and durability.
・Use an UHS-I (Ultra High Speed-I)-compatible card for the SD Memory Card
that supports the speed class Class 10.
[Note:]
・[Rapid PTZ] [Insert/Remove SD memory card
PTZ Camera.
[Note:]
・[Rapid PTZ]
"Now Maintenance Mode" is displayed on the image during
[Insert/Remove SD memory card mode], and functions such as pan/tilt operation
are restricted.
mode] will appear only in Rapid
218
Advertisement
Table of Contents
