Table of Contents
Advertisement
2 Operation
2.4 Viewing images from mobile/tablet terminals
[Fixed shutter]:
If [Image capture mode] is in 30 fps or 15 fps mode:
[1/30 fixed], [3/120 fixed], [2/100 fixed], [2/120 fixed], [1/100 fixed], [1/120 fixed], [1/250
fixed], [1/500 fixed], [1/1000 fixed], [1/2000 fixed], [1/4000 fixed], or [1/10000 fixed]
If [Image capture mode] is in 25 fps or 12.5 fps mode:
[1/25 fixed]/[3/100 fixed]/[2/100 fixed]/[1/100 fixed]/[1/250 fixed]/[1/500 fixed]/[1/1000
fixed]/[1/2000 fixed]/[1/4000 fixed]/[1/10000 fixed]
When [Image capture mode] is 60 fps:
[1/60 fixed]/[1/100 fixed]/[1/120 fixed]/[1/250 fixed]/[1/500 fixed]/[1/1000 fixed]/[1/2000
fixed]/[1/4000 fixed]/[1/10000 fixed]
If [Image capture mode] is in 50fps mode:
[1/50 fixed]/[1/100 fixed]/[1/250 fixed]/[1/500 fixed]/[1/1000 fixed]/[1/2000 fixed]/[1/4000
fixed]/[1/10000 fixed]
⑨[Preset position setting]
Set the preset position.
Before registering the preset, move the camera in the direction you want to register.
To change the orientation of the camera, enable [Swipe operation permission] and select the
image position to be centered on the image angle. The camera's orientation moves to a position
centered on the clicked position.
If you want to zoom in, enable [Swipe operation permission] and select the zoom area in the
picture.
[Note:]
・If you increase the shutter speed (～1/10,000), you will be less prone to blur
even when the subject moves faster.
・Increasing the shutter speed decreases the sensitivity.
・If [Super Dynamic] is set to [On], [Fix shutter] cannot be set. To configure [Fix
shutter], set [Super Dynamic] to [Off].
・[Indoor scene(60Hz)] cannot be set when [Image capture mode] is in 25fps, 50fps,
or 12.5fps modes.
[Important]
・When registering a preset position using a tablet, pay attention to the following.
-If updating of the image on the tablet is slow, it is recommended that you register
the preset while viewing the image on the confirmation monitor.
-If you resize the screen with tablet operation, you may not be able to change the
106
Advertisement
Table of Contents
