16 [Maintenance] to maintain the machine
16.3 [Status] for checking the status
USB interface
[Status]
If you recognize that the Wi-Fi USB adapter for installation is connected to the USB port, the
Wi-Fi USB adapter part number information is displayed. If it is not recognized, [Not use] is
displayed.
[Disable]
To disable the Wi-Fi USB adapter for installation, press [Execute].
If you want to recognize the Wi-Fi USB adapter again, use the INITIAL SET button.
Initialize (refer to the WEB Guide for instructions on how to initialize using the INITIAL SET
button).
SD Memory Card
[Model no.]
Displays the model number of the SD memory card. If the product number data acquisition fails,
[Read error] is displayed. When the SD Memory Card is not used, [Not use] is displayed.
Otherwise, [Unknown] is displayed.
[Serial no.]
Displays the SD Memory Card serial number. If the serial number is not obtained, [Unknown] is
displayed.
[Remaining capacity]
Displays the remaining capacity and total capacity of the SD Memory Card. The [SD memory
card] tab-SD Memory Card info [Remaining capacity] on the Basic Page and the displayed content
are the same.
[Total use time]
Displays the energizing time of the machine with the SD Memory Card inserted. If it fails to
acquire the operating hours, [Unknown] is displayed. The operating time is updated once an hour.
[Number of overwrite times]
Displays the total capacity of the SD Memory Card, the number of files written to the SD Memory
[Note:]
・[Rapid
PTZ] [Active ClearSight] will appear only in Rapid PTZ Camera. Images
may be distorted during [Active ClearSight] operation.
[Note:]
・Only the models that the USB adapter can connect to are displayed.
・Refer to the catalog specifications for the functions installed in each model.
455