i-PRO WV-X86531-Z2-PTZ User Manual page 207

8 [Basic] for basic setup of the machine
8.1 [Basic] to perform basic settings
[Date/time]
Enter the current date and time. If you selected [12h] in [Time display format], select [AM] or
[PM].
When [Set PC time to the camera] is checked and [Set] is clicked, the date and time of the
computer are obtained and set to the computer.
Settable range:Jan/01/2013 00:00:00～Dec/31/2035 23:59:59
[Date/time display]
Use [On] or [Off] to set whether the date and time are displayed on the images. When the date
and time are not displayed, set it to [Off].
[Time display format]
Select the time display method from 24h/12h. Enter the [Date/time] according to this setting.
[Date/time display format]
Select the date display format. If [Date/time] is set to [13:10:00 on April 1, 2022], the display
formats are as follows.
DD/MM/YYYY: 01/04/2022 13:10:00
MM/DD/YYYY: 04/01/2022 13:10:00
DD/Mmm/YYYY: 01/Apr/2022 13:10:00
YYYY/MM/DD: 2022/04/01 13:10:00
Mmm/DD/YYYY: Apr/01/2022 13:10:00
[Date/time position]
Select the position where the date and time are displayed on the image.
[Upper left]: Displayed in the upper left corner of the window.
[Lower left]: Displayed in the lower left corner of the window.
[Upper center]: Displayed in the center of the window.
[Lower center]: Displayed at the bottom center of the window.
[Upper right] is displayed in the upper right corner of the window.
[Important]
・If you need to set the time more accurately in system operation, use the NTP
server.
→14.2.3 Set up an NTP server
[Note:]
・[MULTI] [Date/time display] can be set individually by the cameras.
200