i-PRO WV-X86531-Z2-PTZ User Manual page 397

13 [User mng.] to set authentication
13.6 [Security] to configure security
Set the length of time the SNMP/FTP cannot be accessed.
Input range: 10 to 1000(s)
SNMP/FTP access blocking conditions - Input range (times)
Set the conditions (number of failed attempts) before access to the SNMP/FTP is prohibited.
Input range: 1 to 5 (times)
SNMP/FTP access blocking conditions - Input range (s)
Set the conditions (specified length of time) before access to the SNMP/FTP is prohibited.
Input range: 1 to 100(s)
Browser Access
Set whether or not to enable/disable browser access.
[Note:]
・If you want to use the browser access blocking function in [Brute force attack
countermeasures], set [User auth.] to [On] on the [User auth.] tab.
[IMPORTANT]
・If [Browser Access] is set to [Disable], access to live images is disabled.
・To switch [Browser Access] from [Disable] to [Enable], you need to initialize the
setting data.
Refer to the camera's Operating Instructions for details on initializing the settings.
390