Table of Contents
Advertisement
8 [Basic] for basic setup of the machine
8.2 [SD memory card] for setting SD Memory Cards
[Ext. software mode]
This setting is set to [On] when the installed function extension software uses the SD Memory
Card of the computer.
[On]:The function extension software can use the SD Memory Card of the computer.
[Off]:The function extension software cannot use the SD Memory Card of the computer.
[SD memory card file system type]
You can select the file system format of the SD memory card. This can be selected only when [Ext.
software mode] is [On].
[FAT(FAT16/FAT32/exFAT)]：FAT formatted SD memory cards can be used.
[ext(ext4)]：ext formatted SD memory cards can be used.
[Note:]
・If [Image capture mode] is set to [60fps Mode] or [50fps mode], the SD Memory
Card functions are not available. [SD memory card] is set to [Not use].
[Note:]
・For the functional extension software we sell and provide, please refer to our
technical information website<Control No. C0103>.
・It is recommended to format the SD Memory Card when setting the function
extension software mode from [On] to [Off].
・The operation of the recording function to the SD Memory Card cannot be
guaranteed when the extended software using the SD Memory Card is operated.
[Important]
・If you change [SD Memory Card File System Format], click the [Execute] button
in [Format] to format the SD memory card.
[Note:]
・When "ext(ext4)" is selected, the SD memory card can be used only with
function extension software. Therefore, you will not be able to use functions such
as recording video and audio to the SD memory card, or notification of remaining
space in the SD memory card.
・When "ext(ext4)" is selected, the past information on the SD memory card will be
deleted and cannot be displayed in the [Status] tab of the Maintenance page.
→16.3 [Status] for checking the status
208
Advertisement
Table of Contents
