i-PRO WV-X86531-Z2-PTZ User Manual page 317

10 Set PTZ
10.2 [Position] for setting positions
Preset position setting
[Preset ID]
Use [On] and [Off] to set whether the position name is displayed. You can set for each preset
position.
[On]:Displays the position name.
[Off]:The position name is not displayed.
[Preset ID (0 – 9,A – Z)]
Enter the name to be displayed on the image. You can set for each preset position.
Number of characters that can be entered:0 to 40 characters
Input Characters:0-9 (single-byte), A-Z (single-byte, uppercase, lowercase), double-byte,
single-byte symbol ! " # $ % & ' ( ) * + , ‑ . / : ; = ?
[Auto focus]
Use [Auto] and [Off] to set whether auto focus is performed after the preset is moved. You can set
for each preset position.
[Auto]:Auto focus is performed after the preset is moved.
[Off]:Auto focus is not performed after moving the preset.
[Note:]
・Depending on the operating environment (+5 °C or less as a guideline), the
speed of the preset movement may be slightly slower.
[Important]
・If you have configured [Preset ID (0 – 9,A – Z)] and [Preset ID], be
sure to press [Register].
[Note:]
・When set to [On], the position name is displayed where you set the position in
[Camera title position] on the [Basic] tab.
[Note:]
・The position name entered is displayed next to the preset position number in the
pull-down. If [Preset ID] is set to [On], it can also be displayed on the images.
310