Table of Contents
Advertisement
9 [Image/Audio] for setting images and sound files
9.5 [Audio] for setting sound
You can switch the lens distortion compensation ON/OFF.
Move the slider bar in the [+] direction or [-] direction to adjust the image distortion.
Press [Reset] to return to the default settings.
9.5
[Audio] for setting sound
Click on the [Audio] tabs of the video and audio pages. Refer to the following how to display and
operate the Advanced menu.
→5.1 How to display
→5.2 How to operate
Here, the settings related to sound are made.
Voice input
[Mic input volume]
Set the volume of sound input to the computer. This setting is reflected in the volume of sound
(listening) on the computer and the volume at [Audio recording].
[Mic strength]/[Mic in progress]/[Microphone weak]:Set the volume when the sound is entered
into the camera by microphone.
[Line Strength]/[In Line]/[Line Weak]:Set the volume when the sound is inputted to the camera
line.
[AGC (audio)]
The earpiece sound is automatically amplified and adjusted to the appropriate volume. Select the
degree of amplification from High/Middle/Low. When set to [High], it is easier to hear a small
[Note:]
・When EX optical zoom is used, lens distortion compensation does not work.
・When lens distortion compensation is set to ON, all cameras are set to ON.
Turning on lens distortion compensation may lower the frame rate.
・[New X Fixed]If [Shake] is set to [On], [Lens distortion <br>compensation]
cannot be used.
[Note:]
・Images and sound are not synchronized. Therefore, there may be a slight
deviation between the image and sound.
・Depending on the network environment, audio may be interrupted.
297
Advertisement
Table of Contents
