Table of Contents
Advertisement
5 Displaying the camera settings menu from the PC
5.3 Camera Advanced Menu Screen
→10 Set PTZ
⑧ [Alarm] buttons
Alarm page is displayed. On the alarm page, the alarm operation and operation detection area
are set, the disturbance detection area is set, the sound detection alarm is set, and the alarm
notification is set.
→12 [Alarm] to set the alarm
⑨ [User mng.] buttons
Displays the User Administration page. The User Management page is used to register
authentication and configure data encryption to restrict users and PCs accessing the computer.
→13 [User mng.] to set authentication
⑩ [Network] buttons
Displays the network page. The network pages configure the network settings for your
computer and the settings for DDNS (Dynamic DNS), SNMP (Simple Network Management
Protocol), FTP/SFTP, NTP servers, UPnP, HTTPS, Qos, SRTP, and MQTT.
→14 Networking configuration [Network]
⑪ [Schedule] buttons
Schedule page is displayed. In the Schedule page, the schedule is set for operation detection
permission, disturbance detection permission, sound detection permission, etc.
→15 [Schedule] for scheduling
⑫ [Maintenance] buttons
Displays the maintenance page. On the Maintenance page, you can check the system log,
upgrade the software version, check the status, and initialize the settings of the computer.
→16 [Maintenance] to maintain the machine
⑬ [Support] buttons
The Support page is displayed. The support pages show how to display our support websites.
→17 Viewing Our Support Website [Support]
⑭ [Camera title]
Displays the currently set camera title.
⑮ [Settings page]
Displays the page of each setting menu. Depending on the menu, some pages may have more
than one tab. The lower part of the setting page is omitted.
152
Advertisement
Table of Contents
