Table of Contents
Advertisement
12 [Alarm] to set the alarm
12.10 [Notification] to set alarm notification
Settable range:0～30
Destination of notification
PTZ camera, Compact Dome camera, New X Fixed Cameras
[Address 1] ～ [Address 8]
Set the unique alarm notification destination with IP address or host name. You can set up to 8
notification destinations.
[Alarm] field:When the checkbox is checked, the alarm will be notified.
[Diag.] field:When checked, notification of the remaining capacity of the SD Memory Card, lack of
free space of the SD Memory Card, SD Memory Card recognition error, SD Memory Card write
error, and expiration of the trial period of the function extension software are notified.
[Destination server address] field:Enter the IP address or host name of the notification destination.
Input Characters:One-byte alphanumeric and one-byte symbols: . _ ‑
To delete the specified notification destination, press [Delete] for the notification destination to
be deleted.
[Auto track cooperation]
ON/OFF is used to set whether or not automatic tracking linkage is set.
When [Auto track cooperation] is set to [On], alarm notification is executed only when [Alarm
Area No.] matches the [Alarm area] number set for auto-tracking alarm. Alarm notification other
than the automatic tracking alarm is not performed. When using the Auto Tracking Coordination
function, set the alarm area condition in Auto Tracking to [On].
[Alarm area No.]
Settable range:1～4
Multi-directional camera
[Note:]
・Only PTZ cameras are displayed for auto-tracking.
[Important]
・If you want to enter a hostname for [Destination address], you must configure the
DNS on the [Network] tab of the network page.
→14.1 Networking [Network]
・Make sure that the notification destination is set correctly. If the notification
destination does not exist, a proprietary alarm notification delay or transmission
failure may occur.
368
Advertisement
Table of Contents
