Table of Contents
Advertisement
8 [Basic] for basic setup of the machine
8.5 [Overlay image] to set overlays
[Overlay]
Use [On] or [Off] to set whether the uploaded images are overlaid or not.
[On]:Displays the overlay. When set to [On], overlaid images are recorded during recording on
the SD Memory Card.
[Off]:Overlay is not displayed.
[Image Selection]
Follow the procedure below to upload an overlay image file to the computer.
1)Click the [Select File] button to select the image file saved in the PC.
2)Click [Execute] to upload the selected image files to the computer. When an image file is
uploaded, the uploaded image (uploaded image) is displayed as an overlay on the setting screen.
You can use image files with the following specifications for overlay display:
・Image format: 256 color bitmap (BMP: Windows format)
・Image size: 24 pixels x 24 pixels to 512 pixels x 512 pixels
・File capacity: 257 Kbytes or less
[Note:]
・[MULTI] [Camera selection] can be selected only for Multi-directional cameras.
[Note:]
・If [[Character size]] is set to [150%] or [200%] for [Characters in Date/Time
Screen], [Overlay] cannot be set.
・[New X Fixed]If [Image capture mode] is set to [60fps Mode] or [50fps Mode],
[Overlay] cannot be set.
・Refer to the catalog specifications for the functions installed in each model.
[Note:]
・Save the image file in a folder that does not use space or double-byte characters.
You may not be able to upload files saved in spaces or folders using double-byte
characters.
223
Advertisement
Table of Contents
