Table of Contents
Advertisement
18 Other
18.2 Trouble!?
Fail to register
[Viewnetcam.com]
services
Phenomenon
No Picture
Blur the image
The camera is not
focused
immediately after
the power is
turned on.
The image is not
updated
The camera image
is not displayed
(dark).
Look whitish
・Is there a possibility that the registered e-mail
address is incorrect? If the e-mail containing the
links to the [Viewnetcam.com] services website is
not sent, the registered e-mail address may be
incorrect? Refer to the [Viewnetcam.com]
services website to register the e-mail address
correctly.
Causes and countermeasures
・Please refer to the instruction manual for your
mobile terminal/tablet terminal for information
about the limitation of image data size that can be
displayed on the mobile terminal/tablet terminal.
・Check that the focus is adjusted correctly.
・Focus and zoom are adjusted after starting the
camera, and the camera is out of focus for a
certain period of time.
・Depending on the web browser or version, images
may not be updated or other problems may occur.
・Images may stop being displayed due to network
congestion or concentration of access to the
machine. Request the acquisition of images by
pressing the [F5] key on the PC keyboard.
・Is the [Brightness] set to darken? Click [Normal]
for brightness.
・Is the [Brightness] set to brighten? Click
[Normal] brightness.
When the [Adaptive black stretch] slider bar is
moved in the [-] direction, the image is darkened.
473
--
Reference
--
Operation Manual
Installation
--
Operation Manual
Installation
--
2.3.2 About live image
pages
2.3.2 About live image
pages
9.4.1 To adjust the
image quality (image
quality adjustment
screen)
Advertisement
Table of Contents
