Table of Contents
Advertisement
14 Networking configuration [Network]
14.1 Networking [Network]
If [Manual] is set to [On], IPv6 addresses must be entered manually.
Enter to avoid duplication with other devices.
[Default gateway]
Enter the default gateway for the IPv6 network when the IPv6 network [Manual] is [On].
[DHCPv6]
You can configure [On]/[Off] to use the IPv6 DHCP feature.
Configure the DHCP server so that the PC and other network cameras that do not use the DHCP
function do not have the same IP address. Contact your network administrator for server
configuration.
[Primary DNS server address], [Secondary DNS server address]
Enter the IPv6 address of the DNS server. Contact your system administrator for the IPv6 address
of the DNS server.
Common
[HTTP port]
Assign individual port numbers.
Configurable port number:1～65535
The following port numbers cannot be set because they are used by this computer.
20、 21、 22、 23、 25、 42、 53、 67、 68、 69、 80、 110、 123、 161、 162、 443、 554、 995、
1883、 8883、 10669、 10670、 59000～61000
[Line speed]
Select the data communication speed from the following. Normally, it is recommended to use the
default [Auto].
[Auto]:The communication speed is set automatically.
[100 M‑Full]:100 Mbps full duplex
[100 M‑Half]:100 Mbps half duplex
[Note:]
・When connecting over a router with a manually configured IP address, enable the
automatic configuration feature for IPv6 addresses using IPv6-compatible routers.
Configure an IPv6 address that contains prefix information provided by
IPv6-compatible routers. For details, refer to your router's instruction manual.
[Note:]
・Some ports may not be accessed by some browsers. If access is lost, use HTTPS
or the i-PRO Setup Tool (iCT) to change the port number.
・[MULTI] The port numbers 32768 to 49151 cannot be set.
394
Advertisement
Table of Contents
