Table of Contents
Advertisement
10 Set PTZ
10.3 Set auto-tracking (Auto-tracking screen)
[Sensitivity]
Select the sensitivity during tracking from the following.
[High]/[Middle]/[Low]
[Longest tracking time]
Select the time from below from the start of auto-tracking to forced termination.
[Off(Unlimited)]/[10s]/[20s]/[30s]/[40s]/[50s]/[1min]/[2min]/[3min]/[5min]/[10min]
[Auto track data in video stream]
Select whether to send the superimposed image data by adding auto-tracking information to the
image.
[Off]:Automatic tracking information is not added to the image.
[On]:This feature adds automatic tracking information to images, but does not display target
frames for objects under automatic tracking in live pictures.
[On (with track video display)]:This feature adds auto-tracking information to images and displays
the target frame for objects under auto-tracking in live pictures.
Auto tracking start setting
[Auto pan]
Select whether or not to automatically track the user during auto panning.
[Enable]:Automatic tracking is started during auto panning.
[Disable]:Automatic tracking is not started during auto pan.
[Note:]
・The size is only a guide. Depending on the environmental conditions and tracking
conditions, the assumed size may not be achieved.
・Increasing the size of the object to be tracked reduces the tracking performance.
[Note:]
・The lower the sensitivity, the less false detection due to wooden shaking, but the
lower the tracking performance. On the other hand, higher sensitivity improves
tracking performance, but it also increases false detection. Set according to the
environment.
[Note:]
・After the maximum tracking time, the camera stops in that position. When the
auto mode operation is restored, the self-return time is counted and the auto
mode operation is restored after the tracking is stopped by setting the self-return.
325
Advertisement
Table of Contents
