i-PRO WV-X86531-Z2-PTZ User Manual page 208

8 [Basic] for basic setup of the machine
8.1 [Basic] to perform basic settings
[Lower right]: Displayed in the lower right corner of the window.
[NTP]
Clicking [NTP >>] displays the [Advanced] tabs for the network pages.
→14.2.3 Set up an NTP server
[Time zone]
Select the time zone for the camera area.
[Summer time(daylight saving)]
Use [In], [Out] and [Auto] to specify whether to use Daylight Saving Time. Set in the region where
Daylight Saving Time is used.
[In]:Set the time to Daylight Saving Time. [*] is displayed in the time display.
[Out]:Reset Daylight Saving Time.
[Auto]:Switches to Daylight Saving Time according to the start date and time and end date
settings (month, week, day of week, time).
[Start time & date] [End time & date]
When [Auto] is selected in [Summer time(daylight saving)] Setting, the start date and time of
Daylight Saving Time and the end date and time of Daylight Saving Time are set in Month, Week,
Day of Week, and Time.
[Display on screen]
To make individual settings, select the camera and set the settings.
Select the camera to set the following items individually for each camera.
[Date/time display]
[Date/time position]
[Camera title on screen display]
[Camera title position]
[Camera title on screen display]
[Note:]
・[MULTI] [Date/time position] can be set individually by the cameras.
[Note:]
・[MULTI] When Image capture mode is in Quad/Dual mode, Camera 1 is
automatically selected and other cameras cannot be selected.
・[MULTI] Select Camera 1 in [Display on screen] and select [Reflect all settings
for Camera 1] to set the settings you changed for Camera 1 to all other cameras.
201