Table of Contents
Advertisement
13 [User mng.] to set authentication
13.4 [IEEE 802.1X] to configure IEEE 802.1X
the Advanced menu.
→5.1 How to display
→5.2 How to operate
Here, settings are made for IEEE 802.1X.
This function can be used to build a secure network environment using the authentication LAN
switch. For authentication LAN switches, contact your network administrator. The procedure
varies depending on the [EAP method]. Follow the procedure below. If [IEEE 802.1X] is [On],
start the setting with [IEEE 802.1X] set to [Off].
[IEEE 802.1X]
Configure on/off whether to perform port authentication by IEEE 802.1X.
[User name]
Enter the user name that accesses the authentication LAN switch or the user name registered
with the server.
Enter any username if it is not registered on the server.
Number of characters that can be entered:1 to 32 characters
379
Advertisement
Table of Contents
