Table of Contents
Advertisement
2 Operation
2.4 Viewing images from mobile/tablet terminals
①[Setup menu.] buttons*3
Indicates the setup menu.
②[Switch Display Camera] pull down menu
The camera image displayed in the area ⑤ can be selected.
[Camera 1 to Camera 4]:Images of camera 1, 2, 3 and 4 are displayed at the same time.
Displayed according to the settings in [⑦ Layout Setup pull-down Menu].
[Camera 1 to Camera 3]:Images of camera 1, 2 and 3 are displayed at the same time. Displayed
according to the settings in [⑦ Layout Setup pull-down Menu].
[Camera 1]:Image of camera 1 is displayed as a single image.
[Camera 2]:Image of camera 2 is displayed as a single image.
[Camera 3]:Image of camera 3 is displayed as a single image.
[Camera 4]:The image of camera 4 is displayed as a single image.
③[Camera title]
The title of the camera entered in [Camera title] on the [Basic] tab is displayed.
→3.2 [Basic] to perform basic settings
④[Alarm Notification] button*4
The lamp blinks when an alarm is generated. Click the button to disappear.
[Note:]
・The blinking of the alarm notification button is not linked to the alarm notification
operation such as recording to the SD Memory Card or mail transfer. Check the
setting of each operation.
111
Advertisement
Table of Contents
