Table of Contents
Advertisement
2 Operation
2.4 Viewing images from mobile/tablet terminals
①[Setup menu.] buttons*3
Indicates the setup menu.
②[Camera title]
The title of the camera entered in [Camera title] on the [Basic] tab is displayed.
→3.2 [Basic] to perform basic settings
③[Alarm Notification button]*4
The lamp blinks when an alarm is generated. Click the button to disappear.
④[SD Storage Status Display]
Displays the storage status on the SD Memory Card. When saving starts, the SD save status
indicator turns red. The LED turns OFF when saving stops.
This is displayed when the [Save trigger] in the Setup menu is set to [Manual save] or [Schedule].
→8.2 [SD memory card] for setting SD Memory Cards
⑤[Main area]
Live displays the camera image.
⑥[Capacity display]
The remaining capacity and total capacity of the SD Memory Card are displayed.
⑦[Super dynamic setting]
You can set [On] or [Off] to activate the super dynamic function. You can set for each preset
position. This cannot be set when [Image capture mode] is in [60 fps mode] or [50 fps mode].
See [What is Super Dynamic] for details on super dynamic.
[Note:]
・The alarm notification button blinks in conjunction with the alarm notification
operation such as mail transfer. Check the operation setting.
90
Advertisement
Table of Contents
