Table of Contents
Advertisement
13 [User mng.] to set authentication
13.2 [Host auth.] to configure host-authentication
Focus
operation
Automatic
mode
Brightness
AUX
Preset
position
setting
13.2
[Host auth.] to configure host-authentication
On the Users Administration page, press the [Host auth.] tab. Refer to the following how to
display and operate the Advanced menu.
→5.1 How to display
→5.2 How to operate
Here, the host authentication setting that restricts the PC (IP address) to which the computer can
be accessed is performed.
[Host auth.]
On/Off is used to specify whether or not to perform host authentication.
[IP address]
Enter the IP address of the PC to allow access to the computer. You cannot enter a host name as
an IP address.
Focus operation privileges
Auto mode operation privileges
Authority to set brightness
Aux setting authority
Operation authority of preset position setting
[Note:]
・The items that can be set differ depending on the function of the model.
・Refer to the catalog specifications for the functions installed in each model.
[Note:]
・Register the IP addresses of the PCs, and then set [Host auth.] to [On].
・User authentication is required when user authentication is [On], regardless of
how hosted authentication is configured.
376
Advertisement
Table of Contents
