Table of Contents
Advertisement
13 [User mng.] to set authentication
13.1 [User auth.] to configure user-authentication
2. [Camera control]:Set the access level to camera control. The functions selected in [Access
Level] can be operated.
3. [Live only]:Set the access level to live image display. The functions selected in [Access Level]
can be operated.
[Access Level]
Select a function that can be used according to the user's access level (camera control, live image
display, unregistered user).
・If [User auth.] is set to [Off] and [Guest User] is set to [Not use]:
[Access Level] items cannot be set. In addition, all buttons are displayed in the live picture, but
authentication is required for the [Set] button.
・If [User auth.] is set to [Off] and [Guest User] is set to [Use]:
You can set the [Guest User] items.
・If [User auth.] is set to [On]:
[Guest User] items cannot be set.
Configure these features:
Live image
selection
Listen to
Speak to
Image update
interval
Snapshot
Recording and
playback (Log
display)
Manual
recording/
deletion
Preset
Pan/tilt
operation
Zoom
operation
Right to select the image to be displayed in live
picture
Setting authority of earpiece voice (heard on PC)
Setting authority for voice transmission (speaking
from PC)
Right to set the interval for updating the JPEG image
Snapshot operation privileges
Log display operation privileges
SD Memory Card saving/deletion privilege
Operation privileges for the preset position
movement
Pan/tilt operation authority
Zoom operation authority
375
Advertisement
Table of Contents
