i-PRO WV-X86531-Z2-PTZ User Manual page 218

8 [Basic] for basic setup of the machine
8.2 [SD memory card] for setting SD Memory Cards
[Set]
If an SD Memory Card with no password set is inserted, the password can be set using the Set
button.
[Password]/[Retype password]
Type a password.
Number of characters that can be entered:4 to 16 characters
Characters that cannot be entered:Double-byte and single-byte symbols " &
[Reset]
If an SD Memory Card with the password set has been inserted, the password can be canceled by
pressing the release button.
[Password]
Type a password.
Number of characters that can be entered:4 to 16 characters
Characters that cannot be entered:Double-byte and single-byte symbols " &
[Change]
If an SD Memory Card with the password already set is inserted, the password can be changed by
using the Change button.
[Old password]/[New password]/[Retype new password]
Type a password.
Number of characters that can be entered:4 to 16 characters
Characters that cannot be entered:Double-byte and single-byte symbols " &
[Status]
Displays the password lock setting status.
[During locking]:The SD Memory Card has a password and the lock function is enabled.
[Not set]:Lock function is disabled
The password setting status of the SD Memory Card is displayed.
[Password already set]:The password is set correctly.
[Error (unsupported SD memory card)]:Password lock not supported card is inserted. Check that
the SDHC Memory Card or SDXC Memory Card is inserted.
[Error (password mismatch)]:The SD Memory Card cannot be used because the password set on
the SD Memory Card and the password set on this computer do not match. Confirm the password
is correct.
[Errors (other errors)]:This message is displayed when an error occurs in the SD Memory Card.
211