Set Patrol (Patrol Function Setting Screen) - i-PRO WV-X86531-Z2-PTZ User Manual

10 Set PTZ
10.2 [Position] for setting positions
Auto pan operation
[Dwell time]
Select the stop time at the start and end positions from the following.
[0s]/ [1s]/ [2s]/ [3s]/ [4s]/ [5s]/ [10s]/ [15s]/ [20s]/ [25s]/ [30s]
[Speed]
Select the pivot speed of the pan operation from the following.
[1°/s]、 [2°/s]、 [3°/s]、 [4°/s]、 [5°/s]、 [7°/s]、 [10°/s]、 [13°/s]、 [18°/s]、
[24°/s]
[Zoom], [Focus], Control Pad/Button, [Brightness], and Move presets buttons
Please refer to the following instructions for operation.
→2.3.2 About live image pages
[Close] buttons
Click this button to close the auto pan setting screen.
10.2.4

Set patrol (Patrol function setting screen)

In the [Position] tab of the PTZ-page to the Advanced Settings tab of [Patrol]>>Click the
[Button]. Here, information about patrols is set.
→10.2 [Position] for setting positions
The patrol function stores the pan/tilt/zoom/focus and reproduces the stored operation.
[Important]
・If you set [Auto pan], be sure to press [Set].
[Note:]
・Even when the magnification of the digital zoom is set, the turn of the pan
operation is performed at a position less than 34 times.
317