Table of Contents
Advertisement
2 Operation
2.3 Viewing images from a PC
The main area images are displayed according to the settings in [Stream] and [JPEG].
You can also configure the [Initial display stream] of the [Image] tabs to show the first streams
that appear when you are accessing the cameras.
→9 [Image/Audio] for setting images and sound files
⑤[Select Streams-[Refresh Rate] pull-down menu
This pull-down menu is displayed only when the JPEG image is displayed. Select how the JPEG
image is displayed.
• [MJPEG] Displays JPEG images consecutively (MJPEG: Motion JPEG).
Updates images in • [Refresh interval : 1s]/[Refresh interval : 3s]/[Refresh interval :
5s]/[Refresh interval : 10s]/[Refresh interval : 30s]/[Refresh interval : 60s]: JPEG format (still
image) at specified intervals.
⑤[Stream]-[View Stream Info]
Displays the settings of the compression method, resolution, bit rate, frame rate, etc. of the live
image being displayed.
⑦[Support]Button
Click the Support button to display our Technical Information website in a separate window.
Our technical information website includes technical information, FAQ (Frequently Asked
Questions), etc.
⑧Full Screen button
A new window opens displaying the full screen image.
⑨[Grid display] buttons
You can switch the grid display ON/OFF that can be used to adjust the machine's position
[Note:]
・When the resolution is [1280x720] or higher, the size of the browser screen may
be smaller than the actual size.
[Note:]
・The JPEG format (still image) update interval may not be updated at the specified
interval, depending on your network environment or PC.
[Note:]
・Displays the value set in the stream. The actual bit rate and frame rate vary
depending on your network environment and PC.
40
Advertisement
Table of Contents
