Table of Contents
Advertisement
9 [Image/Audio] for setting images and sound files
9.4 [Image quality] to set the image quality
[AWC]:Set the automatic white balance control mode. Since the light source is fixed, it is suitable
for shooting where the light source does not change. The operating range is from approximately
2000 K to 10000 K.
[Red gain]
Adjusts the red color of the image.
Move the slider bar in the [+] direction to darken the red color. When the slider bar is moved in
the [-] direction, the red color becomes light. Press [Reset] to return to the default settings.
[Blue gain]
Adjust the blue color of the image.
Move the slider bar in the [+] direction to darken the blue color. When the slider bar is moved in
the [-] direction, the blue color becomes light. Press [Reset] to return to the default settings.
[Mask area]
When the mask area is set, the set area can be masked and the white balance can be adjusted.
For details on how to set the mask area, refer to the following.
→9.4.2 Set the mask area
[Adjustment speed]
Adjust the white balance adjustment speed.
Move the slider bar in the [+] direction to increase the white balance adjustment speed. Move the
slider bar in the [-] direction to slow the white balance adjustment speed. Press [Reset] to return
to the default settings.
Intelligent auto
[Intelligent Auto]
[Note:]
・Colors may not be reproducible faithfully if the following conditions are met: In
such cases, set it to [AWC].
Most dark-colored subjects
The outgoing blue sky and the evening sun
Subject with too low illumination
・If [AWC] is selected, press [Set].
[Note:]
・[MULTI] When [Common(Cam. 1-2)] is selected in [Camera selection], the mask
area cannot be set. Set for each camera.
266
Advertisement
Table of Contents
