10 Set PTZ
10.1 [Cam. Function] for setting the operation of cameras
[Off]:The information is not displayed in the image.
[Pan tilt angle/magnification display]:Displays pan angle/tilt angle/magnification.
[Directional view]:Displays the direction.
[Operation mode display]
Displays the operation mode when the camera is running automatically.
[On]:Displays the operating mode.
[Off]:The operation mode is not displayed.
Operation mode
During startup
During auto pan
Automatic tracking (in progress) AUTO TRACKING
During patrol
During the preset sequence
[Tilt-flip]
Select the tilt-flip setting from the following.
[On]:When the tilt end point (directly below) is reached during manual operation, the pan can be
automatically rotated at a high speed to continue operation without stopping at the tilt end point.
[Off]:The tilt-flip function does not work.
[Note:]
When set to • [Pan·Tilt degree/Zoom ratio display], the pan tilt angles/
magnifications are displayed in the [Camera title position] set on the Basic Page
[Basic] tab.
→10.2.6 Setting of pan/tilt range (pan/tilt range setting screen)
When set to • [Direction display], the orientation is displayed in the [Camera title
position] you set on the [Basic] tab of the basic page.
→10.2.5 Setting for direction/direction setting (direction/direction setting screen)
To select • [Direction display], set the reference northern direction with the
[Direction/Angle setting] [North point setting].
→10.2.5 Setting for direction/direction setting (direction/direction setting screen)
Display
INITIAL
AUTO PAN
PATROL
PRESET SEQ
[Note:]
• Even if the tilt-flip function is activated on the TELE side, some parts are not
visible.
In the main area of the Live image pages, clicking the desired position for the
305