i-PRO WV-X86531-Z2-PTZ User Manual page 350

Table of Contents

Advertisement

12   [Alarm] to set the alarm
12.4   [Alarm] to set alarm linkage operation
[Off]:Interlock operation is not performed even if a command alarm is received.
[Alarm interlock]:Alarm operation is performed after the command alarm is received.
[Switching between black and white]:Switches between black and white after receiving the
command alarm.
[Automatic Time Adjustment]:Adjusts the time after the command alarm is received.
[Alarm E-mail notification]
When [E-mail notification setup] is clicked, the setting window for the e-mail when the alarm is
generated is displayed in a separate window.
→12.4.2 Mail sending when an alarm is generated
[Alarm image FTP/SFTP transmission]
When [FTP/SFTP setup] is clicked, a separate window is displayed for FTP/SFTP sending when
an alarm is generated.
→12.4.3 Set up FTP/SFTP transmission when an alarm is generated
[Alarm image recording(SD memory card)]
When [SD memory card setup] is clicked, the settings for recording to the SD Memory Card when
an alarm is generated are displayed in a separate window.
→12.4.4 Sets recording data to SD Memory Card when alarm is generated.
[TCP alarm notification]
When [TCP alarm notification setup] is clicked, the setting window for sending unique alarm
notification when alarm is generated is displayed in a separate window.
→12.4.5 Sets unique alarm notification when an alarm is generated.
[HTTP alarm notification]
When [HTTP alarm notification setup] is clicked, the setting window for sending HTTP alarm
notification when alarm is generated is displayed in a separate window.
→12.4.6 Sets HTTP alarm notification when an alarm is generated.
[SNMP transmission upon alarm detection]
When [To SNMP setting] is clicked, the setting window for sending SNMP when an alarm is
generated is displayed in a separate window.
→12.4.7 Set SNMP transmission when an alarm is generated.
[Note:]
・[MULTI_PTZ] Only Multi-directional cameras with integrated Multi-directional/
PTZ cameras can be set to [Action at the time of a command alarm].
343

Advertisement

Table of Contents
loading

Table of Contents