i-PRO WV-X86531-Z2-PTZ User Manual page 213

8 [Basic] for basic setup of the machine
8.1 [Basic] to perform basic settings
[Mirror]
Use [On]/[Off] to set whether the images are reversed left or right.
[Indicator]
Select the ON/OFF status of the lamp. To check the operation status with the lamps, select
[On].
[Audio out]
Sets whether to use the audio output terminal as the adjustment monitor output.
Audio/monitor
[Monitor out]
Set the image format to be output from the image output terminal (MONITOR OUT).
NTSC/PAL
270°.
・[New X Fixed]Even when [Image capture size] is set to 320x180, you can set
[Image rotation] to 90° or 270°.
・Refer to the catalog specifications for the functions installed in each model.
[Note:]
・If [Image rotation] is set to [90°] or [270°], the mirror inversion is fixed in
[Off].
・Refer to the catalog specifications for the functions installed in each model.
[Note:]
・Refer to the catalog specifications for the lamps installed in each model.
・[MULTI_PTZ] [Indicator] can be set from the PTZ-camera.
[Note:]
・When [Audio out] is set to [Audio], [Monitor out] cannot be selected.
・If you set [Audio transmission mode] to other than [Off] or [Mic input], you
cannot set [Audio out] to [Monitor].
・If you set [Audio out] to [Monitor], you cannot set [Audio transmission mode] to
anything other than [Off] or [Mic input].
206