Table of Contents
Advertisement
9 [Image/Audio] for setting images and sound files
9.4 [Image quality] to set the image quality
[Privacy zone:Min. Zoom]
Use [On] or [Off] to toggle the smallest zoom in zones.
[On]:The current zoom position is saved.
[Disable]:The zoom position is saved as X1 times. The privacy zone is always displayed regardless
of the zoom position.
[Zoom] buttons
:Adjust the zoom factor in the [Telescope] direction.
:Zoom (magnification) 1.0 times.
:Adjust the zoom factor in the [Wide angle] direction.
[Focus] buttons
[Auto]:Automatically adjust focus.
[Near]:Adjust the focus (focus) to [Near].
[Far]:Adjust the focus (focus) to [Far].
Control pad/button
Left-click the pads and buttons to adjust the horizontal and vertical position of the image (pan
tilt).
The faster the camera operates, the faster the outside of the pad is clicked.
You can also drag and adjust the mouse. Zoom and focus by right-clicking.
Clicking on the upper half of the pad in the upper and lower directions will zoom in the telephoto,
and clicking on the lower half will zoom in the wide angle. Clicking on the left half in the left and
right directions will bring the focus (focus) close to you, and clicking on the right half will bring it
far away. You can also adjust the zoom by using the mouse wheel.
[Brightness] buttons
It can be adjusted from 0 to 255. Click the [Light (+)] button to brighten the image. Click the
[Black (-)] button to darken the image. Press [Normal] to return to the default settings.
Move button
[Note:]
・The privacy zone should be set broadly for objects that you want to hide.
It is recommended to set the zone between 1 and 3 times the zoom magnification
to increase the zone accuracy on the wide angle side.
[Note:]
・If enabled, the privacy zone will not be displayed if you move to a magnification
lower than the set zoom magnification.
284
Advertisement
Table of Contents
