Table of Contents
Advertisement
13 [User mng.] to set authentication
13.4 [IEEE 802.1X] to configure IEEE 802.1X
Enter any username if it is not registered on the server.
You do not need to enter [Password]/[Retype password].
Example of [CA Certificate Confirmation] window
[Client Certificate Confirmation Screen] example
[Note:]
・To delete individual certificates, set [IEEE 802.1X] to [Off].
・Confirm that the CA and client certificates have not expired. The port
authentication feature may not be available if it is expired.
[Important]
・If the camera cannot be accessed for some reason after the camera is set to [On]
by [IEEE 802.1X], connect the camera to an unauthenticated switch or port.
IEEE802.1X will be disabled and the camera will be accessible.
383
,
Advertisement
Table of Contents
