i-PRO WV-X86531-Z2-PTZ User Manual page 376

12 [Alarm] to set the alarm
12.10 [Notification] to set alarm notification
[Address 1] ～ [Address 48]
Set the unique alarm notification destination with IP address or host name. You can set up to 48
notifications.
[Alarm] field:When the checkbox is checked, the alarm will be notified.
[Diag.] field:When checked, notification of the remaining capacity of the SD Memory Card, lack of
free space of the SD Memory Card, SD Memory Card recognition error, SD Memory Card write
error, and expiration of the trial period of the function extension software are notified.
[Destination server address] field:Enter the IP address or host name of the notification destination.
Input Characters:One-byte alphanumeric and one-byte symbols: . _ ‑
To delete the specified notification destination, press [Delete] for the notification destination to
be deleted.
[Notification per Camera]
ON/OFF is used to specify whether or not to execute the transmission setting by camera.
When [Notification per Camera] is set to [On], [Camera No.] is notified when [Camera No.]
matches the number of the camera that generated the operation detection alarm or when [Camera
No.] matches the camera number of the clicked live display.
[camera No.]
Settable range: 1 to 4
[Notification per VMD area]
ON/OFF is used to set whether the operation detection area-specific transmission is set.
When [Notification per VMD area] is set to [On], alarm notification is executed only when [Alarm
Area No.] matches the [Alarm area] number set for the operation detection alarm. Alarm
notification other than the operation detection alarm is not performed. When using the operation
detection area-specific transmission function, set the alarm area status for operation detection to
[On].
[Alarm area No.]
[Note:]
・[MULTI] This item is not displayed when [Image capture mode] is in Quad/Dual
mode.
[Note:]
・[MULTI] This item is not displayed when [Image capture mode] is in Quad/Dual
mode.
369