Table of Contents
Advertisement
2 Operation
2.3 Viewing images from a PC
when using the function extension software.
For the size of adjustments for each of the functional extensions we sell and provide, our
technical information website<Control No.: C0320>It is listed.
⑩[Snap shot] BottaNs
A snapshot (one still image) is acquired and the image is displayed in a separate window.
Right-click on the image to save the image using the web browser function.
⑪[Camera Control Panel Display]Button(
The camera control panel can be displayed or hidden. The camera control panel can be set to
[Brightness], etc.
⑫[PTZ panel]-[Zoom] buttons
Adjust the zoom manually.
・
:Adjust the zoom factor in the [Wide angle] direction.
・
:Zoom (magnification) 1.0 times.
・
:Adjust the zoom factor in the [Telescope] direction.
⑬[PTZ panel]-[Focus]
Adjust the focus manually with the buttons.
• [Auto]: Automatically adjusts focus.
• [Near]: Adjust the focus to the [Near].
• [Far]: Adjust the focus to the [Far].
• [Displays the auto focus frame]: [On] and draw a frame on the image to adjust the focus (focus)
to the frame.
[Note:]
・If it takes more than a certain period of time to acquire a snapshot depending on
the network environment, the image may not be displayed.
・If the specified resolution of JPEG cannot be acquired, the JPEG image with the
available resolution is displayed.
Therefore, if you snapshot a JPEG image and refer to it on a PC, the image size
may differ from the displayed image size.
・[New X Fixed-8MP][New X Fixed-6MP][New X Fixed-5MP]This function is not
available when [Image capture mode] is set to [60fps Mode] or [50fps Mode].
[Note:]
・The following subjects cannot be focused with auto focus. Focus manually.
-A subject that is bright or reflects strong light
-Subject over water droplets or dirty glass
)
41
Advertisement
Table of Contents
