Setting Of Pan/Tilt Range (Pan/Tilt Range Setting Screen) - i-PRO WV-X86531-Z2-PTZ User Manual

10 Set PTZ
10.2 [Position] for setting positions
[N]:Set the north direction name.
[NE]:Set the name in the northeast direction.
[E]:Set the name in the east direction.
[SE]:Set the name in the southeast direction.
[S]:Set the name in the southern direction.
[SW]:Set the name in the southwest direction.
[W]:Set the name in the west direction.
[NW]:Set the name in the northwestern direction.
[Panning 0° direction setting]
Set the direction of the pan to 0°. If you adjust the field angle with the control pad/button and
click the [Set] button, the direction of the pan you are presently pointing to will be 0°. Press
[Reset] to return to the default settings.
[Zoom], [Focus], Control Pad/Button, [Brightness], and Move presets buttons
Please refer to the following instructions for operation.
→2.3.2 About live image pages
[Close] buttons
Click this button to close the direction/direction setting window.
10.2.6

Setting of pan/tilt range (pan/tilt range setting screen)

In the [Position] tab of the PTZ-page to the Advanced Settings tab of [Pan/tilt range setting]>>
Click the [Button].
→10.2 [Position] for setting
[Note:]
・Tilts are not set in the 0° direction.
・Changing the 0° direction of the pan does not change the position of the preset
position already set. The set auto pan turns within the same range as before the
change. Similarly, the same operation as before the change is performed for the
patrol setting.
positionsHere, the range of pan tilt is set.
321