i-PRO WV-X86531-Z2-PTZ User Manual page 412

14 Networking configuration [Network]
14.2 [Advanced] for advanced networking settings
[Terminal 2]:Transmit the image to the server when an alarm occurs in Terminal 2.
[Terminal 3]:Transmit the image to the server when an alarm occurs in Terminal 3.
[VMD]:Transmit the image to the server when motion is detected.
[SCD]:Transmit the image to the server when SCD (scene change detection) occurs.
[Auto track]:Transmit the image to the server when an auto track occurs.
[Audio detection]:Transmit the image to the server when audio detection occurs.
[Command alarm]:Transmit the image to the server when a command alarm is entered.
[FTP transmission retry]
Select [On] or [Off] to determine whether or not to resend failed FTP transmissions.
[On]:If transmission fails, transmissions are resent until they are successfully sent.
[Off]:If transmission fails, the image that failed to be sent is discarded and the next image is sent.
[Pre alarm]
[Transmission interval]
Select the transmission interval of images before an alarm occurs from the following.
When 60fps mode, 30fps mode or 15fps mode is selected for [Image capture mode]:
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps/ 2fps/ 3fps
When 50fps mode, 25fps mode or 12.5fps mode is selected for [Image capture mode]:
0.08fps/ 0.17fps/ 0.28fps/ 0.42fps/ 1fps/ 2fps/ 3fps
[Maximum number of images]
Select the number of images to be transmitted from the following.
[0 pic]/[1 pic]/[2 pics]/[3 pics]/[4 pics]/[5 pics]/[6 *]/[7 *]/[8 *]/[9 *]/[10 *]/[20 *]/[30
*]/[40 *]/[50 *]
[Recording duration]
Approximate time to be taken to save the set [Maximum number of images] with the set
[Note:]
・The items that can be set differ depending on the function of the model.
・Refer to the catalog specifications for the functions installed in each model.
[Note:]
・When SFTP is selected in [Transmission protocol] settings, FTP transmission
retry is unavailable.
・When 2fps or 3fps is selected in [Refresh interval], FTP transmission retry is
unavailable.
405