i-PRO WV-X86531-Z2-PTZ User Manual page 30

2 Operation
2.3 Viewing images from a PC
4 Enter the username and password and click [OK] to display the Live image pages. For more
information on Live image pages, please see the following.
→2.3.2 About live image pages
[Note:]
・If [User auth.] is set to [Off], the Username and Password entry window will not
be displayed prior to the live page.
[Important]
・If you try to display multiple H.265 (or H.264) images on a single PC, depending
on the performance of the PC, the image may not be displayed.
[Note:]
・Users with simultaneous access to this product are up to the sum of users
receiving H.265 (or H.264) images and users receiving JPEG images. However,
depending on the [Bandwidth control(bit rate)] [Bit Rate* per Client] setting, the
number of users that can be accessed may be limited to [Maximum number of
users] or less. If the number of accessible users exceeds [Maximum number of
users], an access excess message is displayed. When [Stream] [Transmission
type] is set to [Multicast], the second and subsequent users receiving H.265 (or
H.264) images are not counted as accesses.
・[Maximum number of users] depends on the model.
Up to 14 persons: PTZ camera, Multi-directional camera (2-eye U-series),
Compact Dome camera, New X fixed camera
Up to 24 persons: Multi-directional camera (4 eyes), Multi-directional camera (3
eyes), Multi-directional camera (2 eyes/S-series)
・When [Stream transmission] is set to [On], the H.265 (or H.264) images are
displayed according to the [Stream encoding format] settings. When set to [Off],
.
23