Table of Contents
Advertisement
2 Operation
2.3 Viewing images from a PC
㉑[Camera control panel]-[AUX] buttons
This setting is available only when [Terminal 3] of [Alarm] is set to [AUX output] in the
Advanced menu.
• [Open]: The aux terminal is open.
• [Close]: The aux terminal closes.
→7.3.2 Alarm: Sets terminal and operation detection (alarm setting screen)
㉒[SD memory card]-[b]Display/play
Clicking [Start] displays the log list and plays back the images stored on the SD Memory Card.
Please refer to the following for details of the log list and how to play back the image.
→2.7 Display the log list
㉓[SD memory card] −[Rec. on SD]
This can only be set when [Save trigger] is set to [Manual save] on the [SD memory card] tabs.
You can manually save images to SD Memory Cards by clicking [Start]. To manually save
images on the SD Memory Card, refer to the following.
→2.5 Manually save images on the SD memory card
㉔[Set] buttons(
You can view or hide the setting panel.
→3 Setting
㉕[Alarm notification]
When an alarm is generated, it is displayed as a popup. Clicking the [X] button resets the
output terminal and the display disappears.
cursor returns to the earpiece volume set in the [Audio] tabs of the setting
menus.
・On the screen, the volume cursor can be fine-tuned, but actually it is set to one
of four levels of volume.
・If you open multiple camera browsers simultaneously on the same PC, you cannot
hear the sound of the camera browser opened later. Access and check one by one.
・If network communication is unstable, voice reception may be stopped. In this
case, restart voice reception by turning on and off the earpiece button.
→3.7 [Audio] for setting sound
[Note:]
・The names of [AUX], [Open], and [Close] can be changed.
→12.3 [Alarm] to change the aux name
)
45
Advertisement
Table of Contents
