Table of Contents
Advertisement
2 Operation
2.3 Viewing images from a PC
⑳[PTZ-panel]-[Preset No.]
Select the preset position from the pull-down menu and click the [Move] button to move the
camera's orientation to the preset position registered beforehand.
→10.2.2 Set the preset sequence setting (preset sequence setting screen)
[H] next to the number indicates the home position. Select [HomePosition] to move the
orientation of the camera to the home position.
→10.1 [Cam. Function] for setting the operation of cameras
If [Preset ID (0 – 9,A – Z)] is registered, the position name is displayed next to the number.
㉑[PTZ-panel]-[Cam. Function]
[Home position]
You can set the preset position as the home position. When the home position is set, [H] is
displayed next to the preset position number.
→10.2.2 Set the preset sequence setting (preset sequence setting screen)
[Self return]
When the time set by [Self return time] has elapsed after the manual operation is completed,
the camera can automatically return to the operation mode set by the camera.
[Self return time]
[Note:]
・If the content of [Self return] operates at the time set by [Self return time] during
the auto mode operation, the auto mode operation stops.
→10.1 [Cam. Function] for setting the operation of cameras
[Note:]
・If you want to move to the home position when the power is turned on, set
[HomePosition] to [Self return].
[Note:]
・If you want to perform the above operations when turning on the power, it is
convenient to use the self-return function.
・The self-return function works even when the setting menu is displayed.
・[Patrol] can be set only when patrols are set.
→10.2.4 Set patrol (Patrol function setting screen)
・[Preset sequence] can be set only when preset sequence is set.
→10.2.2 Set the preset sequence setting (preset sequence setting screen)
61
Advertisement
Table of Contents
