Table of Contents
Advertisement
2 Operation
2.6 Operation when alarm is generated
[Audio detection alarm]:An alarm is activated when the set sound detection threshold is exceeded.
Alarm Notification from Function Extension Software:When the function extension software with
an alarm function is installed, an alarm is activated when an alarm is generated by the function
extension software.
2.6.2
Operation when alarm is generated
Displaying alarm notification on live image page
When an alarm is generated, the alarm notification is displayed on the [Live] page.
→2.3.2 About live image pages
Notify the device connected to the output terminal of the alarm
When an alarm is activated, a signal can be output from the output terminal to sound an alarm,
etc. The outputs are set on the [Alarm] tabs of the alarm pages.
→12.2 [Alarm] for setting the output terminal
Save images on the SD Memory Card
When an alarm is activated, images (JPEG/H.265/H.264) are saved on the SD Memory Card. To
save images on the SD Memory Card, use the [SD memory card] tab on the basic page and the
[Alarm] tab on the alarm page.
→8.2 [SD memory card] for setting SD Memory Cards
→12.1 [Alarm] to set alarm operation
Notify the alarm by e-mail
When an alarm is generated, an e-mail notifying that an alarm has occurred (alarm notification) is
sent to the previously registered e-mail address. You register up to four mail messages to send
alarms. You can also attach a still image to send an alarm mail. Alarm mail is set on the [Alarm] tab
of the alarm page and on the [Advanced] tab of the network page.
→12.1 [Alarm] to set alarm operation
→14.2.1 Set mail sending
Notifies that an alarm has occurred at the specified address (unique alarm notification)
This function is useful when using devices manufactured by us (network disk recorder, etc.). When
[TCP alarm notification] is set to [On], the computer can be notified that it is in the alarm
condition. You can set your own alarms by using the [Notification] tabs on the alarm pages.
→12.10.1 Set unique alarm notification
Notifying that an alarm has occurred on the specified HTTP server (HTTP alarm notification)
When an alarm is generated, the alarm is sent to the pre-registered HTTP server. You can
register up to five notified HTTP servers. You can also set the URL you want to send to the
HTTP server. The HTTP alarm is set on the [Notification] tab of the alarm page.
117
Advertisement
Table of Contents
