Table of Contents
Advertisement
9 [Image/Audio] for setting images and sound files
9.4 [Image quality] to set the image quality
[Level]
Select the brightness (illumination) level to switch between color image and black-and-white
image from the following. The following switching illuminance is the illuminance when [Super
Dynamic] is [Off].
3:The brightness (brightness) of the camera is about 8 lx or less, and the image is switched to
black and white.
2:The brightness (brightness) around the camera is about 4 lx or less, and the camera switches to
a black-and-white image.
1:The brightness (brightness) of the camera is about 2 lx or less and the image is switched to black
and white.
0:The brightness (brightness) around the camera is about 1 x or less, and the image is switched to
black and white.
[Dwell time]
Select the time before switching between color image and black-and-white image from the following.
[2s]/ [10s]/ [30s]/ [1min]
[IR LED light intensity]
Select IR light intensity from [High]/[Middle]/[Low]/[Off].
However, this is not an error.
・Automatic color/black-and-white image switching may not work depending on the
environment. In this case, use the scheduling function to change the color
image/black-and-white image. How to set up is our technical information website
<Control No. C0314>.
・[MULTI] If [D&N] is set to other than [Off], all cameras will be changed to the
same setting.
・[Rapid
PTZ][Auto3(SCC)] cannot be selected.
[Note:]
・The color image switching is about 5 to 8 times bright. It may vary depending on
the environment.
・If [Maximum gain] is set low, it may not be easy to switch over depending on the
environments.
264
Advertisement
Table of Contents
